Cellular Accessories

Bluetooth Solutions

Audio Products

NFC offers an extremely simple setup. Android Beam software uses NFC to complete the steps of enabling, pairing and establishing a Bluetooth connection. Simply tap your NFC enabled device on this unit and you are paired. Simply pair your Bluetooth enabled device–such as your smart phone, iPad, Android tablet and connect to your AV receiver, multimedia speakers and more with this bluebooth receiver. With the inclusion of the highly renowned apt-X codec, this receiver allows you to enjoy wireless Bluetooth audio quality indistinguishable from wired, with an impressive dynamic range. Featuring a high-quality DAC that helps clean up poor audio that is often found in downloaded music and videos. Also SBC compatible for other Bluetooth devices using the A2DP standard. The receiver outputs audio through both analogue and digital outputs simultaneously Not only does this make it great for hooking up to your high-end amplifier or receiver using the high quality digital link, but you can also plug in another pair of powered speakers at the same time This allows you to listen through either system without the need to connect to another Bluetooth device A Signal-to-Noise Ratio (SNR) of more than 100dB, in combination with 2Vrms output at maximum volume means the receiver can not only compensate for low volume sources, but gives you a wider range of control from your mobile device without losing audio quality or increased background hiss you get from other devices on the market Basically keep the volume on your amp or speakers low for reduced noise, and control the audio level directly from your phone or tablet—perfect for audiophiles

BLUETOOTH STEREO RECEIVER WITH NFC

BTR-1700NFC

 
 
 
 
 
 

 
 

BLUETOOTH STEREO RECEIVER WITH NFC

 


Code BTR-1700NFC
Description Bluetooth V3.0 Stereo EDR A2DP Receiver With NFC
Colour Black
Series Audio
Page 11


ORDER CODE:
BTR-1700NFC

STOCK STATUS
INSTOCK

QTY  

buy

NFC - Near Field Communications
Bluetooth V3.0 Stereo EDR A2DP Receiver With NFC
NFC offers an extremely simple setup. Android Beam software uses NFC to complete the steps of enabling, pairing and establishing a Bluetooth connection. Simply tap your NFC enabled device on this unit and you are paired. Simply pair your Bluetooth enabled device–such as your smart phone, iPad, Android tablet and connect to your AV receiver, multimedia speakers and more with this bluebooth receiver. With the inclusion of the highly renowned apt-X codec, this receiver allows you to enjoy wireless Bluetooth audio quality indistinguishable from wired, with an impressive dynamic range. Featuring a high-quality DAC that helps clean up poor audio that is often found in downloaded music and videos. Also SBC compatible for other Bluetooth devices using the A2DP standard. The receiver outputs audio through both analogue and digital outputs simultaneously! Not only does this make it great for hooking up to your high-end amplifier or receiver using the high quality digital link, but you can also plug in another pair of powered speakers at the same time! This allows you to listen through either system without the need to connect to another Bluetooth device! A Signal-to-Noise Ratio (SNR) of more than 100dB, in combination with 2Vrms output at maximum volume means the receiver can not only compensate for low volume sources, but gives you a wider range of control from your mobile device without losing audio quality or increased background hiss you get from other devices on the market! Basically keep the volume on your amp or speakers low for reduced noise, and control the audio level directly from your phone or tablet—perfect for audiophiles!
NFC Quick Link Support for Auto-Pairing. Supports pairing with up to 8 devices Bluetooth® V3.0+EDR A2DP Apt-X Lossless and SBC Codec Support Up to 48KHz 16 Bit stereo. 20-20KHz 100dB Dual simultaneous outputs: Digital and Analogue: S/PDIF Optical output: For pure digital audio connection, ideal for connecting to AV Receivers 3.5mm stereo output: For connection to any active speaker system or amplifier, headphones, etc. Toslink Optical Output (Requires S/PDIF lead) 3.5mm output (M-M & M-RCA lead supplied) 5Vdc power pack supplied Status/connected LED Indicator Compact 75x70x22mm
Input Spec DC Power 5V/0.6A,5.5X2.5mm,center positive Output Audio R/L 3.5mm TOSLINK Control Auto Pairing Bluetooth Profile A2DP aptX® codec Supported SBC codec Supported Devices memorized 8 Electric Performance – RF Frequency 2402~2480MHz Sensitivity -84dBm Maximum received signal at 0.1% BER >= -10dBm Maximum level of intermodulation interference >= -30dBm Spurious output level -156dBm/Hz Electrical Performance—audio R/L Audio Output Level (nominal) 2 ± 10%Vrms Frequency response 20~20 KHz ± 3 dB Channel Separation Audio R/L - 70 dB SNR (nominal, Audio RL) >=90dB THD(nominal, Audio RL) <0.05% Weight(g) 240g Audio cable 3.5mm male to 3.5mm male 1.8M 3.5mm female to RCA male 15cm Adaptor 5V 0.6A





No downloads currently available for this product.

Please contact us with your download requirements,e.g. User Manual, Data Sheet, etc and will get back to you.

Full Name*
Email*
Phone*
Code*
img
Download Required / Comments* Chars Remaining
Submit Reset
Full Name*
Email*
Phone*
Code*
img
Question* Chars Remaining



Contact us for Bulk Buy and Project Based Pricing for BLUETOOTH STEREO RECEIVER WITH NFC

Product Code
Full Name*
QTY Required *
Email*
Delivery Time *
Phone*
Target Price
Notes / Addtional Info. Chars Remaining
Code*
img
Submit Reset


  COMPANY INFO
MY ACCOUNT